Jetpilot24

My Feedback: (21)

Just a simple poll, what servos are being used in jets

JR
Futaba
Hitec
Savox
MKS

rcjetsaok

My Feedback: (7)

You forgot Spektrum...

Dansy

My Feedback: (53)

I'm using JR, Futaba my next jet will be Hacker DITEX servos

cessnaflyer54

My Feedback: (68)

I'm using XQ Power servos.

Len Todd

JR and Hitec. Mostly Hitec.

SECRET AGENT

My Feedback: (18)

Airtronics

rc4flying

My Feedback: (21)

All Futaba.

tp777fo

My Feedback: (28)

With trouble JR is having, I am changing to MKS.

FenderBean

I use futaba because I use SBus on all my jets, planes and helis. I have used JR but with no programming options for me it's just not the best bang for my buck. I love the soft start feature and compared to everything I have used have less play over time. I use small Hitecs for gear doors and brake valve action. With all that being said if you think it's best doesn't matter what others use. I have also had some experience with Savox and found they are just as good as futaba and JR.

Dave Wilshere

I like Savox, but they are no JR. watch the Gnat video, changing from 1256TG to JR 8911 has changed the model like you would not believe. I've flown a lot of the same models and I can tell what servo they have without asking. From where we were 10 years ago ( where JR were the only choice ) there are lots of possible options, but JR are still the one to beat. Let's hope supply continues on the 8911, 8411 has now finished until they decide on a possible NX version.

Desertlakesflying

My Feedback: (28)

Which servos are these?

SECRET AGENT

My Feedback: (18)

Skidmark servos, HA!

DelGatoGrande

My Feedback: (23)

Used Hitec HS-7955TG in more than 15 big jet models ,years now with great success .
With 25kg of torque at 80$ its hard to beat.
Also it can be programmed for reverse / center / end points .

Jetpilot24

My Feedback: (21)

So after a couple of days here, I figured JR would be high on the list. Problem is not too much available in 6.0 voltage for use.

Joe Lewis
Kingtech
K80
K140
K180
owner

CraigG

My Feedback: (40)

I think you would get different results in 6 months. Many of us (me included) are current/long time JR users but now find ourselves looking for alternatives. I would be interested in hearing about peoples actual experiences down the road. I'm going to try MKS in my next jet.

Craig

SECRET AGENT

My Feedback: (18)

Maybe the poll should be about what servos will you use on your NEXT jet.

Bob Toilet

Been using JR 8911 and Hitec 7955. On my next jet (T-3) i
will try the new Hitec D 950 TW and D 955 TW. With Soft start function.

causeitflies

I use Hitecs and saw the new replacement for the 7955 at Toledo. I have enough 7955's for my next project so didn't investigate too much.

K.O.

My Feedback: (16)

Use all Hitec mostly 7955 in control surfaces. No failures yet in 7 years of jet flying.

K.O.

DrV

My Feedback: (2)

JR only user for years. Now with limited availability switching to MKS.

Auburn02

My Feedback: (1)

I checked every box, but there are still others with no box available (Spektrum).

rcjetsaok

My Feedback: (7)

Yea, What he said.... Whats's up with that... Does Spektrum not even qualify in you possibilities of choices?? I know lot's of guy's useing Spektrum in very expensive models with great success.. I don't get the fact you don't even acknowledge that Spektrum is a choice..
Just wondering..\

D

tisdall_80

Hitec are the best bang for buck in my experience. Never had an issue..

1-large-bob

My Feedback: (18)

I've been using MKS servos 4 yrs now
with out any issues
Thomas @ MKS USA provides great support here in the US

thanks
robert bernal

raron455

My Feedback: (38)

After my 2nd JR failure, my buddy Robert turned me to MKS, I loaded my F16,and my P51 with em, they are flawless. Now when I buy servos, MKS is my First choice..