PCM Models AV8R ?
#1
Thread Starter
My Feedback: (12)
Join Date: Dec 2001
Location: reisterstown, MD
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
Hello All,
I am in the process of building an AV8R and I am missing the nose gear mount block. I have writing Pat but he must be away for the holidays as he has not responded in 5 days. Can any of you tell me what brand of nose gear he used so I can close up the front of the plane. I didn't notice that it was missing until after I installed the bulkhead which is already drilled for his hardware choice. I would like to get it finished by Weds I go back to work on Thurs and the start of the year is always hectic.
Thanks, Ron
I am in the process of building an AV8R and I am missing the nose gear mount block. I have writing Pat but he must be away for the holidays as he has not responded in 5 days. Can any of you tell me what brand of nose gear he used so I can close up the front of the plane. I didn't notice that it was missing until after I installed the bulkhead which is already drilled for his hardware choice. I would like to get it finished by Weds I go back to work on Thurs and the start of the year is always hectic.
Thanks, Ron
#2
My Feedback: (5)
Join Date: Mar 2002
Location: Huntington,
WV
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
AV8R nose gear
Hi Ron;
If you will e-mail your address to me, I will send you the nose gear that came in my AV8R kit.
I replaced mine with a Fults double strut as I intend to fly this out of our grass field, which is too small for my larger turbines.
Best regards
Ron Jahnig
If you will e-mail your address to me, I will send you the nose gear that came in my AV8R kit.
I replaced mine with a Fults double strut as I intend to fly this out of our grass field, which is too small for my larger turbines.
Best regards
Ron Jahnig
#4
Thread Starter
My Feedback: (12)
Join Date: Dec 2001
Location: reisterstown, MD
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
Thanks guys for the replies and offers. I was able to get the info I need from Pat this evening. He is now using the sig nose gear blocks instead of the dubro one and I will pick one up at the hobby shop tomarrow,
Ron
Ron
#5
Junior Member
Join Date: Dec 2002
Location: Morehead City, , NC
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
PCM AV8TR Kit
Dear Ron, Where did you buy your AV8TR kit? I saw a photo of one on Frank Tiano's website and am curious as to where to buy it.
Thanks,
Mick Georgin
Thanks,
Mick Georgin
#6
Senior Member
My Feedback: (11)
PCM Models AV8R ?
Hi Mick,
You can buy direct from Pat McCurry, the designer.
I don't think he has an ad & link here on RCU to help you find him, but I'm sure someone here can tell you how to contact him.
IIRC, his website is something or other with "pcm" in the URL. A google search would probably find it.
Gordon
You can buy direct from Pat McCurry, the designer.
I don't think he has an ad & link here on RCU to help you find him, but I'm sure someone here can tell you how to contact him.
IIRC, his website is something or other with "pcm" in the URL. A google search would probably find it.
Gordon
#8
My Feedback: (11)
Join Date: Dec 2001
Location: Lakeland,
FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
Hi all.
For those looking for Pat's website, it is: FlyPCM.Com John and I have been flying 2 of those AV8Rs and we are having a blast. I think between us we have almost 70 flights in just 2 months! Pat has been flying his longer than we have been, and I think he has logged over 100 flights! It is the most fun you can have for under $400!! This airplane goes a long way in teaching a newcomer turbine protocall while remaining aerobatic enough for the best of us. IF anybody needs any info, I am happy to help. Happy New Year to All,
FT
For those looking for Pat's website, it is: FlyPCM.Com John and I have been flying 2 of those AV8Rs and we are having a blast. I think between us we have almost 70 flights in just 2 months! Pat has been flying his longer than we have been, and I think he has logged over 100 flights! It is the most fun you can have for under $400!! This airplane goes a long way in teaching a newcomer turbine protocall while remaining aerobatic enough for the best of us. IF anybody needs any info, I am happy to help. Happy New Year to All,
FT
#9
Junior Member
Join Date: Dec 2002
Location: Morehead City, , NC
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
Thanks Frank for your info! Would one of your new jet engines fit the requirements of this model? If so how much can I expect to invest in the whole set-up? Just a ball park price. I've been building giant scale and need to get a jet!
Thanks, Mick Georgin
Thanks, Mick Georgin
#10
My Feedback: (11)
Join Date: Dec 2001
Location: Lakeland,
FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
Yes, the T-500 is an ideal engine, and we are taking orders now for late January delivery, BUT, soon there will be others that will fly the AV8R as well. I would imagine that by May or June you will see a 500 sized engine from SimJEt, PST, SWB and possibly even JetCat. As far as cost, I think that you could be flying an AV8R for less than $2850 not including your radio.
#11
Senior Member
My Feedback: (1)
PCM AV8R
Ron,
Sorry I missed your e-mail, I been away for a while and I hope everything works out okay for you.
Frank is right the website is www.flypcm.com. As for an available AV8R kit, I am starting a new run of kits in about a week or so. If you need one now I think frank may still have his.
By the way that little t 500 from FTE is just right for this model. We are finding that it one reliable engine and its available now direct from FTE.
If you have any questions regarding the kit or engine, feel free to give us a call at 561 793 6850.
Thanks.
Sorry I missed your e-mail, I been away for a while and I hope everything works out okay for you.
Frank is right the website is www.flypcm.com. As for an available AV8R kit, I am starting a new run of kits in about a week or so. If you need one now I think frank may still have his.
By the way that little t 500 from FTE is just right for this model. We are finding that it one reliable engine and its available now direct from FTE.
If you have any questions regarding the kit or engine, feel free to give us a call at 561 793 6850.
Thanks.
#12
Thread Starter
My Feedback: (12)
Join Date: Dec 2001
Location: reisterstown, MD
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
PCM Models AV8R ?
If I can interject a few points as well. The plane builds fast! I thought that my Bobcat built fast. I have in total 10 hours building time and it is ready to cover and install the equipment. If you have a vacuum system and a large building room so that you can do the wings, tail and fuse at the same time I bet you could get it framed in one long day. I am going to use it as a intro plane for guys in my club to get their turbine waivers. See all of you next year at FLA Jets.