JL 1/8 F16 ARF accessories needed
09-17-2007, 03:58 AM
#2
My Feedback: (1)
Join Date: Jul 2005
Location: hull, UNITED KINGDOM
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
RE: JL 1/8 F16 ARF accessories needed
Hi,
Radio, turbine, fuel tubing, filters, offset hinges and sequencer, UAT, door cylinders...
Is this what you was looking for?
Jeff
Radio, turbine, fuel tubing, filters, offset hinges and sequencer, UAT, door cylinders...
Is this what you was looking for?
Jeff
09-17-2007, 07:16 AM
#3
Thread Starter
Join Date: Jun 2005
Location: Sao Jose do Rio Preto- SP, BRAZIL
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
RE: JL 1/8 F16 ARF accessories needed
Hi Jeff.
Thanks for answer.
Sorry ,i were not more specific.
Which gear cylinder door size?
How many gear door hinges i will need?
Bypass is needed?
What about wings horns and links?
Thank you once again.
Achilles.
Thanks for answer.
Sorry ,i were not more specific.
Which gear cylinder door size?
How many gear door hinges i will need?
Bypass is needed?
What about wings horns and links?
Thank you once again.
Achilles.
09-17-2007, 10:19 AM
#4
My Feedback: (9)
Join Date: Apr 2002
Location: Belton , MO
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
RE: JL 1/8 F16 ARF accessories needed
Wing horn's and Linkages are included,
you will need 3 Off Set hinges per door (3) = 9 hinges.
3 , 1 1/4 inch stroke Pnuematic cylinders,
UAT, JMP or BVM , Or others will work.
I used 3 air tanks. kit came with 1. so 2 tanks and 2 fill valves and a door valve. "T" Connectors.
You will need 2 miles of Pneumatic line. [X(]
5 36 inch extensions, 2 elevator. 2 wing and 1 rudder.
I used 2 Matchboxes, 1 on the elevator, and one on the rudder steering. If you don't want flaps You will need a Y for the ailerons.
I bought a bunch of metal servo horns.
Don't forget fuel line and a couple of "T" connectors.
There are other things as well.
you will need 3 Off Set hinges per door (3) = 9 hinges.
3 , 1 1/4 inch stroke Pnuematic cylinders,
UAT, JMP or BVM , Or others will work.
I used 3 air tanks. kit came with 1. so 2 tanks and 2 fill valves and a door valve. "T" Connectors.
You will need 2 miles of Pneumatic line. [X(]
5 36 inch extensions, 2 elevator. 2 wing and 1 rudder.
I used 2 Matchboxes, 1 on the elevator, and one on the rudder steering. If you don't want flaps You will need a Y for the ailerons.
I bought a bunch of metal servo horns.
Don't forget fuel line and a couple of "T" connectors.
There are other things as well.
