Official Traxxas Jato 3.3 Thread
#701
Junior Member
Join Date: May 2009
Location: Carman, MB, CANADA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Ok well i am finally geting my jato tuned into where i like it. I started to play with the shifting but i can\t get it to shift into second. how many turns will it take, i went from the stock 24t to a 18t clutch bell. i turned the screw out anout a turn and a quarter and still no second.
#702
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
ORIGINAL: slednut87
Ok well i am finally geting my jato tuned into where i like it. I started to play with the shifting but i can\t get it to shift into second. how many turns will it take, i went from the stock 24t to a 18t clutch bell. i turned the screw out anout a turn and a quarter and still no second.
Ok well i am finally geting my jato tuned into where i like it. I started to play with the shifting but i can\t get it to shift into second. how many turns will it take, i went from the stock 24t to a 18t clutch bell. i turned the screw out anout a turn and a quarter and still no second.
http://www.traxxas.com/support/kb_se...cat=203&id=162
#703
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
well i ordered 20 % odonnels race ,i got odonnels 20% r2r well i had one tank of trinty monster ran that tank did not adjust carb put in odonnels r2r, well i was mad cause i did not get what i wanted but tried it anyway it blows trinty out of the water my truck ran 180 temp in the heat of day idle was great need less to say i love odonnels
#704
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
well i brought in my schumacher 21 xtr 3e and was rolling it and the brakes was not releasing so i used the linkage collar on the shaft to release the brakes like on my jato thanks again quietnas1 now my brakes hold till i touch the gas and she rolls free like i said thanks again.
#705
RE: Official Traxxas Jato 3.3 Thread
Lol no problem man. Still got the Jato sitting on the side lines. Its keeps raining here every day so I don't see the point in fixing it yet. I am ordering parts like crazy for my RC10GT though. Can't waite to get that one on the road.
#708
Senior Member
My Feedback: (1)
Join Date: Apr 2009
Location: tinley park,
IL
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Put the 18 tz in a rc 10 with a 19/60 gearing. Ttrust me you wont regret it!! It makes the cvr look like the AE 15 that comes in them.
#710
RE: Official Traxxas Jato 3.3 Thread
The only one I ever rebuilt was an old OS .15CV. All I did was replace the piston and sleeve and it turned out pretty good. I Had that motor from 2000 to about 2007. I still have it but it needs to be rebuilt again but I just get new motors now. Less hassle. I enjoy rebuilding the actual car or modifying it more than messing with the engine.
And about the .18TZ I was thinking about it but one fast as hell car is good enough. Besides parts are getting hard to find for the GT so I'm gonna baby it once its done.
And about the .18TZ I was thinking about it but one fast as hell car is good enough. Besides parts are getting hard to find for the GT so I'm gonna baby it once its done.
#711
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
yea parts for my schumacher are real hard to find but i have one xtra car for parts 3 motor 1 xtra trans wheels but alloy is hard to find, if i ever get time i am going to install the 3 speed oh boy i can not wait .
#712
Join Date: Jan 2007
Location: Oshkosh,
WI
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Hi guys I'm a newbie at trucks but a proud Jato owner. Perhaps not the best first nitro truck, but nothing else out there looks as good. So with that I have a question, the Jato I have I got used, nothing wrong with it except I have the black/silver/yellow Jato body. I would love to have the blue/yellow Jato body they must have come with a while ago. does any one know where I can get one? Thanks. S
#713
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Well Im not sure where you can find that exact body but if you search online you can more then likely find it. Look into the crowd pleazer body. They are pretty tight and look good with your option of how you wanna place decals. You can also get some nice looking wing 2 go on it and it'll look real nice. I seen a few REAL nice custom jobs some guys have done and its like no other. I think that is best. 2 have something like no other out there and have your own style. But if you really want that blue/yellow body just google search jato 3.3 bodies and see what you can find.
But anyway quitnas1 this is for you...............I took my tranny apart today after about 2 hours trying 2 remove a stripped screw I had. Finally went 2 auto zone and bought a screw extractor kit and in about 10 seconds I had it out wish I would have done that in the 1st place. But anyway......After taking it apart trying 2 figure out why it wouldnt shift into 2nd I realized it was what you said it may be. That little silver thing you talked about in the pic you posted...Well sure enought hat thing had snapped off so the clutch had nothing 2 grab and engage. The thing that sucks is that I just spent 35$ on a new diff and clutch and it turned out 2 be fine. So I just had 2 ordered a new clutch gear. I hope it gets here in time. I am moving in a week so I'll be F*C#ED if not. Gotta love RC man. Thanks for the onfo tho. After going thru all this with the tranny I could prolly take it apart with my eyes closed.
#714
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
ajk2649 i was going to buy that buku from you but had to buy fuel pump for my truck did not have enough to do it all. but i still want it just a little later.
#715
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
ORIGINAL: jbrobertsonjr
ajk2649 i was going to buy that buku from you but had to buy fuel pump for my truck did not have enough to do it all. but i still want it just a little later.
ajk2649 i was going to buy that buku from you but had to buy fuel pump for my truck did not have enough to do it all. but i still want it just a little later.
#716
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
yea i am waiting on parts for my jato , what is bad is that i lost the part that i had to order,building a set of wheelie bars for my schumacher 21 xtr out of aluminum it always something.
#717
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Yeah i hear ya man. This hobby sure is killin the bank but then again if I didnt do this I would prolly just spend more money on beer.
I already have another RC in mind that I want. Im deff gonna get a 1/8 scale. I want either the kyosho inferno ST or the Mugen MBX6T. All of which are pretty expensive but either way I want an 8 scale and its gotta be a truggy. I just gotta some how swing around 600$ with the wife and she'll be cool with it.
#718
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
dont buy a cheap one, like my daddy told me you get what you pay for, if its cheap its junk ,i bought a cheap one and throwed it a way after i hit it with a sledge hammer lol
#719
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Oh trust me bro I know all about that. My 1st RC was a speedy tiger that cost about 150-200 bucks. I thought I was getting a steal after lookin on other sites. Then again that was way b4 I knew anything about RC cars and how true the "you get what you pay for" saying is. I ran into problem after problem with that thing and finding parts is like finding a cure for cancer and then if you do its being shipped from Tiwan and takes WEEKS.
I came back from Iraq and got the jato and realized what RC really is and that speedy tiger went right in the dumpster. But now after the Jato I want something bigger that I can take off road cuz the jato doesnt do all that well off road unless you mod it and by the time i spend more money on mods for it I can just have bought the truck I want so.........
#721
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
yeah I dont know much about schumacher RC's but I have heard great things about them and all the vids I have seen on youtube look really nice and good quality and super fast.
#722
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
my schumacher is what got me into nitro rc it has always run perfect of course i had to tune it but it always cranked the motor is looseing its pinch but will still pulled the front wheels anytime on 20 % nitro fixing to install 3 speed fresh motor shoulb run 70 mph motor has 2.1 bhp 1/10 scale
#723
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
Are they kit cars 2 where u need 2 buy motor radio reciver and all that or do they come RTR? What motor you gonna go with? And is it 1/8 scale?
#724
Senior Member
Join Date: Mar 2009
Location: paris,
TN
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
some are rtr and some are kits the on road fusion engine is thunder tiger pro28 i think its 2.45 bph supposed to run 80 but i love my jato oh yea its got a 3 speed ,what if a jato had a 3 speed it would be bad
#725
Senior Member
Join Date: Jul 2007
Location: Clarksville, TN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Traxxas Jato 3.3 Thread
What motor are you gonna put in it? The picco 21 P9R is a sick motor and if you really wanna get crazy the os .28XZ is super fast as well. I dont know how much u wanna spend of if either would fit but just a thought either way you would be happy and have a beast 2 control.