hitec HPD-07RH QPCM reciever question
#1
Member
Thread Starter
Join Date: Sep 2005
Location: La CeibaAtlantida, HONDURAS
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
hitec HPD-07RH QPCM reciever question
Hey guys i just bought this receiver. seems nice, but i was reading something about being able to connect two identical batteries via two switches, what does this mean? can the reciever feed off the two packs? like some redundant system?? it did say they have to be identical.
Richard
Richard
#2
Senior Member
RE: hitec HPD-07RH QPCM reciever question
The batteries have to be the same type, i.e. NiMH or NiCad and they must both contain the same number of cells. They can be of different capacitys though such as a 500mah one and a 1200mah one. Each battery should have it's own switch and wiring to the receiver and each must be charge seperately.
#3
Member
Thread Starter
Join Date: Sep 2005
Location: La CeibaAtlantida, HONDURAS
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
RE: hitec HPD-07RH QPCM reciever question
ORIGINAL: Rodney
The batteries have to be the same type, i.e. NiMH or NiCad and they must both contain the same number of cells. They can be of different capacitys though such as a 500mah one and a 1200mah one. Each battery should have it's own switch and wiring to the receiver and each must be charge seperately.
The batteries have to be the same type, i.e. NiMH or NiCad and they must both contain the same number of cells. They can be of different capacitys though such as a 500mah one and a 1200mah one. Each battery should have it's own switch and wiring to the receiver and each must be charge seperately.
Richard