RE: Axial SCX 10
 

Nice track!

Honcho rear upper links are 98mm and lowers are 106mm i've been making Stainless link kits for a few years now...

If coin is a problem grab yourself 2x m3x40mm grub screws and 4x m3 nylocks and you'll have adjustable rear uppers (double up for both ends) untill you get the funds up. Lets face it tho, you have new links so you dont need new ones unless your making a custom rig. Once you get full into scale there's tons of stuff to spend your hard earned onhttp://www.rcuniverse.com/forum/js/f...sn/biggrin.gif

Hope that helps ya out...
<br type="_moz" />

RE: Axial SCX 10
 

cheerz m8

I think aknitroguy is going to fix me up. See the rear is fine, its the front, I want to run 4link front. but the bits supplyed in the kit are to long for the top arms

RE: Axial SCX 10
 

No dramas, you can do the same to the lowers, but at the diff side so they dont hang up on stuff till you get your parts off your mate. You can get upper and lowers (Alloy) from Ebay Au $10 posted.

Hope all works out.
<br type="_moz" />

RE: Axial SCX 10
 

no kidding dammmm lol is that to run a 4link on the front
any idea on what ones I would need??? for use with the stock 4link truss?

RE: Axial SCX 10
 

Yeh man, for four link. you should need 2x 85mm uppers. (313mm) wheel base.
<br type="_moz" />

RE: Axial SCX 10
 

There ya go bud, I found the kit and took a pic.All 6061

Honcho Full kit:
uppers
lowers
steering

All that was $25 Delivered

Take it easy

RE: Axial SCX 10
 

Dammmm got a link?

RE: Axial SCX 10
 

I'll check later for ya and pm you it... i forgot the pic....lol

RE: Axial SCX 10
 

That is a killer deal. postage won't be a great deal either. 6061 is the stuff, thats what I use. Way harder than the stock alloy.
Glad you found some for a great price, full set too! nice.
cheers!

RE: Axial SCX 10
 

please do, thanks man

RE: Axial SCX 10
 

man ive checked ebay for that "Honcho Full kit" can find it???