Pictures of your redcats
#1377
Member
Join Date: Jun 2009
Location: Glendale, AZ
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
Hex wheel size are the same as 1/10th scale trucks. I put my Traxxas Slash (1/10th scale) tires on it and took some pictures and posted them a while back so here they are again for you
#1380
Senior Member
Join Date: Aug 2007
Location: .....,
NY
Posts: 2,149
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
Ifinally got mine and Ihad to install a separate reciever pack in order to get my spektrum receiver to work. How did you connect your receiver pack? I installed a separate switch.
Thanks
Thanks
ORIGINAL: mdst1960
Here are a couple more to see.....
Here are a couple more to see.....
#1382
Senior Member
My Feedback: (1)
Join Date: May 2009
Location: Mayfield, KY
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
ORIGINAL: chevyderek72
Ahhh watch out its a front end monster in the 3rd to last pic!!!!!
Ahhh watch out its a front end monster in the 3rd to last pic!!!!!
#1384
Member
My Feedback: (2)
Join Date: Sep 2009
Location: groves,
TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
just thought I would post some pics of my backdraft 3.5
http://image2-5.rcuniverse.com/e1/ga...umb-186613.jpg
http://image2-5.rcuniverse.com/e1/ga...umb-186613.jpg
#1386
Senior Member
Join Date: Dec 2007
Location: Mesa,
AZ
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
ORIGINAL: jeztur2003
LOL THAT WAS A TMAXX 3.3 PAINT JOB GONE BAD!
ORIGINAL: chevyderek72
Ahhh watch out its a front end monster in the 3rd to last pic!!!!!
Ahhh watch out its a front end monster in the 3rd to last pic!!!!!
#1391
Senior Member
Join Date: Aug 2009
Location: Orlando, FL
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
does your volcano sv run good? mine will run away from me if i land on the front wheels jumping a curve! should i get all new servo's?
#1395
Junior Member
Join Date: Nov 2009
Location: , NC
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats
This is my very very new Redcat volcano epx pro.. You know I was sweating the whole It's not the fastest thing out there syndrome before I got this truck.. but honestly.. This thing will fly.. I made a ramp today out of a cardboard box, the way that Ali from redcat has shown to in the videos.. This little truck did great.. I did bend the metal piece, looks somewhat like a bone that runs to the front right wheel.. But nothing that taking it apart and bending it back a little didn't fix.. Oh and curious, How tight do the wheels suppose to be on these things? I tighten in up and had problems with the free flowing and actually with the other wheels as well.. So I loosened it up til it felt about like it did before.. But was only hand tight and without a socket, just the bit on it..
And also what charger and battery do I need to get for my truck? The lipo 7.4v is that about the limit on voltage for these trucks with the stock brushless? And what battery cell is it? And what can my truck run? If I got some sort of quick charge for it.. I would want it to be compatible with my factory 7.2V @ 2000 as well.. I mean to charge both with one charger would be great.. What type should I get ?? And what battery would you recommend and where?
These are a few pictures of my truck and my son with his truck as well.. His truck is about 4 months old and is driven just about daily and still using the same first battery we put in it.. And battery charged gives a long time for his little truck.. I mean my little boy is two years old and can actually control the truck fairly well.. I'm impressed..
And also what charger and battery do I need to get for my truck? The lipo 7.4v is that about the limit on voltage for these trucks with the stock brushless? And what battery cell is it? And what can my truck run? If I got some sort of quick charge for it.. I would want it to be compatible with my factory 7.2V @ 2000 as well.. I mean to charge both with one charger would be great.. What type should I get ?? And what battery would you recommend and where?
These are a few pictures of my truck and my son with his truck as well.. His truck is about 4 months old and is driven just about daily and still using the same first battery we put in it.. And battery charged gives a long time for his little truck.. I mean my little boy is two years old and can actually control the truck fairly well.. I'm impressed..
#1398
RE: Pictures of your redcats and other rides
My built Aftershock 8E before paint - totally built with diff fluids and shock oils changed out. This also has all the upgrades and should be one heck of a race monster
Since the last pics I have also installed the aluminum shock towers, a armd braces and softer grip buggy wheels.
Since the last pics I have also installed the aluminum shock towers, a armd braces and softer grip buggy wheels.
#1399
Senior Member
Join Date: Aug 2007
Location: .....,
NY
Posts: 2,149
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
That looks great. What body is that?
What weight oils did you go with?
I took the battery holders off and put velcro straps on instead.
What weight oils did you go with?
I took the battery holders off and put velcro straps on instead.
#1400
Senior Member
Join Date: Aug 2007
Location: Toronto, ON, CANADA
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of your redcats and other rides
ORIGINAL: army2000ng
Is that an HPI savage .25 engine on that car?
Is that an HPI savage .25 engine on that car?