Dbosr

i bought a 1/10th scale himotoracing eldorada nitro rc car for my younger brother, but unfortunatly with him being a young mischevious child, he has adjusted the the screws on the engine, and i have tried looking everywhere for info on how to get it back to factory setup but i cannot find info anywhere, is there any info anyone can give me on setting it up. i found that some cars have 2 or 3 screws on the engine so thought it would be best that i let you know there are only 2 screws on the engine, i have tried many things such as cleaning the fuel lines etc but after much failing i tried putting fuel direct into the carboreta (sp), and it tries to fire but still nothing so i can only think it is something to do with the air/fuel ratio mixture.
any help will be much appreciated


if anyone can be a great pal and help please can you email me on [email protected] with detail on what i'm to do,

AllAboutFunHobbies

Read and print these and you should be good to go, we had them out to every customer that buys a car locally and it makes a good reference guide for them if they forget what we teach them in the half hour class they get. This will work with pretty much every type of engine.

Quick Start Guide:
[link=http://www.redcatracing.com/quickstart.pdf]http://www.redcatracing.com/quickstart.pdf[/link]

Engine Tuning Guide:
[link=http://www.redcatracing.com/tuningyourengine.asp]http://www.redcatracing.com/tuningyourengine.asp[/link]

ehroof

2 1/2 turns out on the high needle and flush with the collar on the low needle, this should get you up and running. i will email this to you too.

AllAboutFunHobbies

I would deffinatlly read the manuals and print them just to have for quick reference on tuning and over all maintaining.