I would rather it happen sanding then in the air!
|
4 Attachment(s)
http://www.rcuniverse.com/forum/atta...mentid=2202927http://www.rcuniverse.com/forum/atta...mentid=2202928http://www.rcuniverse.com/forum/atta...mentid=2202930http://www.rcuniverse.com/forum/atta...mentid=2202931
Hate sanding the spray putty !!!!! :) Hope I am ready to paint it .. now Made folding wings, I will go for film on the wings and paint on the fuse |
It sure looks ready for paint!
|
10 Attachment(s)
Used 3d printed clamps for joining servo cables
http://www.rcuniverse.com/forum/atta...mentid=2203347http://www.rcuniverse.com/forum/atta...mentid=2203348 made a scale cowl for the electronics http://www.rcuniverse.com/forum/atta...mentid=2203349http://www.rcuniverse.com/forum/atta...mentid=2203350http://www.rcuniverse.com/forum/atta...mentid=2203351 and some more water sanding ... still a little details to add putty and sand it , but painting is close ... http://www.rcuniverse.com/forum/atta...mentid=2203352http://www.rcuniverse.com/forum/atta...mentid=2203353http://www.rcuniverse.com/forum/atta...mentid=2203354http://www.rcuniverse.com/forum/atta...mentid=2203355 trial setup http://www.rcuniverse.com/forum/atta...mentid=2203495 |
I'm getting excited with you. Have to take the time to get the sanding and filling right of course. But it is so close now that I want to see it fly!!
Keep up the great work. Looking forward to seeing the finished product! |
The first layer had shown few more address to be resanded, but generally speaking its not bad at all :)
|
2 Attachment(s)
|
I can't wait to see how this bird comes out!
|
I love the color scheme! The blue looks great!
|
I do like your choice of blue over the blue on the full size plane. That looks like it is going to be a blast to fly. I'd love to have either one of those, the full scale or the model.
|
4 Attachment(s)
|
Great job! I hope she flies as good as she looks!
|
That is a very unique cable system, I remember wondering what those bumps were for on the fuselage and know I know. I continue to be impressed and I agree with Flyer, I look forward to a flight review.
|
3 Attachment(s)
very unique indeed :) on real thing that it is really that simple.
http://www.rcuniverse.com/forum/atta...mentid=2205401 i had to refit the elevator horns, due to the angles, not shown correctly in plan http://www.rcuniverse.com/forum/atta...mentid=2205403 Interesting idea for the struts to be mounted easily. http://www.rcuniverse.com/forum/atta...mentid=2205402 |
Very nice!
|
4 Attachment(s)
So first part is ready ... rc put in and tested. Found a few flaws so no maiden now, but getting close ..
https://www.youtube.com/watch?v=8bFl5E4eEco&feature=youtu.be http://www.rcuniverse.com/forum/atta...mentid=2205578http://www.rcuniverse.com/forum/atta...mentid=2205579http://www.rcuniverse.com/forum/atta...mentid=2205580http://www.rcuniverse.com/forum/atta...mentid=2205581 |
From the video it looked like the elevator had more down throw then up throw or was it the angle of the camera throwing me off?
Mike |
It is just camera angle, epa is around 60 prc
|
https://youtu.be/jC6sKHezOO4
Water taxi test, got cg wrong and battery almost depleted ..
|
Still it taxied well! What was the place you were testing at an old public swimming pool? From your jacket and hat I'm glad you didn't have to enter the water to retrieve the airplane. It looked cold!
Mike |
It is a fire water pool, 3 mins from my home :) i had fishing rod standby
|
It handled surprisingly well taxiing around. It looked like it dipped a wing tip one time from torque at full throttle or was that just a wind gust? Do you still plan on putting the wheels on it?
|
The tip thing was probably both of them, torque and wind. Cg way too in front, so the floats weren't getting off water. The wind rotated all around in there ..
|
So has the CG been changed and the plan flowed yet?? I know I'm impatient you are just at an exciting point!
|
All times are GMT -8. The time now is 03:57 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.