reg seyup please help
#1
Senior Member
Thread Starter
My Feedback: (16)
Join Date: Jun 2002
Location: queens,
NY
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
reg seyup please help
I am building a 35% yak and I have most of my equiptment. I plan on using 2 rec's with 2- 7.4v 4400 m/a li-ion batts for redundency. I plan on splitting the load between the 2 rec's as follos; rec 1 has 1- 5925 servo)throttle), 2 - 5955 servos (left ail)and 1 - 8711 servo(left elev). The other rec has 4 - 5955 (rt ail and rudder)servos and 1 - 8711 servo(rt elev). The aileron servos will be programmed for center woth the hitec programmer. I also have a 7.4v 2200 li-ion bat for the igniton for a da100. Will your standard regs w/ failsafe provide enough amperage for each receiver, based on my setup? Also, which reg for the ignition?
Thanks,
SJS
Thanks,
SJS
#2
Senior Member
Join Date: Sep 2004
Location: Tempe,
AZ
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
RE: reg seyup please help
Hi SJS,
The Standard Adj Regulators will work just fine in this application. We have flown 35% planes on a single regulator. The Ignition Reg should work for your ignition.
Please let me know if you have any other questions.
The Standard Adj Regulators will work just fine in this application. We have flown 35% planes on a single regulator. The Ignition Reg should work for your ignition.
Please let me know if you have any other questions.