building the boats 75cm +/-
#1
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Manavgat, TURKEY
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
building the boats 75cm +/-
hello,
I am in the process of building the boats 75cm +/-
it will be fiber glass.
I think of installing this like electronics :
ESC : TR-M-120A - Turnigy Marine 120A Brushless Boat ESC
moteur : HXT36-56-2700WJ - HXT 36-56 2700kv Brushless Inrunner (Wat..
lipo : T4000.3S.30 - Turnigy 4000mAh 3S 30C Lipo Pack
servo : BMS-620MG - BMS-620MG High Torque Servo (Metal Gear)
you think what of it?
the other accessories I will order here: http://www.r2hobbies.com
for can't Shaft + propeller + Fine/Stabilizer + the cap + Collet/Connector I what take?
read that the shaft flexi fibre much?
could you help PLEASE Thank you
I am in the process of building the boats 75cm +/-
it will be fiber glass.
I think of installing this like electronics :
ESC : TR-M-120A - Turnigy Marine 120A Brushless Boat ESC
moteur : HXT36-56-2700WJ - HXT 36-56 2700kv Brushless Inrunner (Wat..
lipo : T4000.3S.30 - Turnigy 4000mAh 3S 30C Lipo Pack
servo : BMS-620MG - BMS-620MG High Torque Servo (Metal Gear)
you think what of it?
the other accessories I will order here: http://www.r2hobbies.com
for can't Shaft + propeller + Fine/Stabilizer + the cap + Collet/Connector I what take?
read that the shaft flexi fibre much?
could you help PLEASE Thank you
#2
RE: building the boats 75cm +/-
You'll get better quality from OSE for hardware, props and cable drive:
http://www.offshoreelectrics.com/
http://www.offshoreelectrics.com/
#3
Senior Member
Join Date: Dec 2006
Location: Centerville,
OH
Posts: 2,302
Likes: 0
Received 0 Likes
on
0 Posts
RE: building the boats 75cm +/-
Should be arround 30K with 3S, which is good, but at that legnth (almost 30") you may want to consider a 4S setup. I don't know what you desire for speed, but your options are better at 4S. Just my two euros.