TFL NTN600 Kiton Twin Setup?
10-23-2011, 07:51 AM
#1
Thread Starter
Join Date: Jan 2010
Location: Boulogne-Billancourt, FRANCE
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
TFL NTN600 Kiton Twin Setup?
You know that P1 hull,?Imagine a twin setup in that boat, what do you think? One 3S battery + two esc + two motors 3000kVor ...I need your advice
HTH600 ull is27”/675mm
10-26-2011, 02:15 PM
#2
Senior Member
RE: TFL NTN600 Kiton Twin Setup?
2 motors / esc's That would be adding too much weight in a hull of that size i would go for a 4s setup and a 2610KV typhoon motor on a 42mm carbon prop .
if you want it to fly
if you want it to fly
10-26-2011, 02:46 PM
#3
Senior Member
My Feedback: (1)
Join Date: Sep 2004
Location: KitchenerOntario, CANADA
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
RE: TFL NTN600 Kiton Twin Setup?
ORIGINAL: madphil
2 motors / esc's That would be adding too much weight in a hull of that size i would go for a 4s setup and a 2610KV typhoon motor on a 42mm carbon prop .
if you want it to fly
2 motors / esc's That would be adding too much weight in a hull of that size i would go for a 4s setup and a 2610KV typhoon motor on a 42mm carbon prop .
if you want it to fly
10-27-2011, 12:03 PM
#4
Senior Member
RE: TFL NTN600 Kiton Twin Setup?
If you want it to blow up, thats a great set up
[/quote]
This is my second year of racing with that setup works well for me on a 26" hull
10-27-2011, 01:12 PM
#6
Senior Member
RE: TFL NTN600 Kiton Twin Setup?
Yes anything over 2000 on 4s will work in this size hull , my setup may be a bit hot its in a light weight carbon cevlar racing MONO 2 boat , if you went half way like an AMMO 2300 there a good cheap motor can swing a 40 / 42mm prop should give good speed .
