RE: GAS F1 INBOARD TUNNEL HULLS
 

have a look at the ML Boatworks hull as well if you are up for a build as that is also from the States. Purpose built or designed will always be easier, but, where theres a will theres a way. Plenty of guys on here will be able to help you with info or suggestions.
Cheers,
Dion.

RE: GAS F1 INBOARD TUNNEL HULLS
 

Just picked up this 1/4 tunnel hull yesterday off Craigslist. Got it cheap. It's a mystery who built it kind of thing. Guy I got it from said a guy with his own molds built it in Florida. It's 49" long with a 17" beam. Top cover is gel coated in red metal flake. Thinking of going inboard on this one as their looks to be plenty of room in hull and top cover. What do y'all think and does anyone know who built it?

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hi guys,
Here's a full fibre glass version of my race proven tunnel.
She handled the Pioneer 29 with comfort and as always turn on a dime.
Also been tested with full OB powered by Pioneer 29 as well and seems to run OK. Need more time to dial her in on both set up.
If things workout as planned, this will be a 2 in 1 . You can set it up as an OB or IB with perhaps a little change to the transom and a little weight distribution shuffling.
Video of the original hull powered by a Zen 7 is here. www.youtube.com/watch?v=FM1EJ8OviCg
Video of the fabricated hull with OB and single steering servo is here www.youtube.com/watch?v=PREOOVXk2ZA

Pic uploading doesn't seem to work. I'll try again.

La-Tiff

RE: GAS F1 INBOARD TUNNEL HULLS
 

Here's my Lorenz F1 with K30r:<div>http://i150.photobucket.com/albums/s...t/IMAG0707.jpg</div><div></div><div>http://i150.photobucket.com/albums/s...t/IMAG0897.jpg</div><div></div><div>http://i150.photobucket.com/albums/s...t/IMAG0898.jpg</div><div></div><div>http://i150.photobucket.com/albums/s...ps03ebe2bf.jpg

http://i150.photobucket.com/albums/s...pseb5f606d.jpg

</div><div>Only run for a few times, still looking for the best prop and settings..</div><div></div><div></div>

RE: GAS F1 INBOARD TUNNEL HULLS
 

Nice looking hull Lex
any vids off runs and how well does the hull handle ;)

RE: GAS F1 INBOARD TUNNEL HULLS
 

My server playing up, so not easy to upload pics. Anyhow here are pics of my tunnel. Race developed and race proven when it was all wooden. Now fabricated and tested before release once testing is done.






. Have to reduce file size first.

RE: GAS F1 INBOARD TUNNEL HULLS
 

Here you go Latiff.
Guys this is Latiiffs beautifull Tunnel hull.
Mart

RE: GAS F1 INBOARD TUNNEL HULLS
 

Thanks mate.
Appreciated. You could do one more little thing that should go with these pics.
Video of the maiden run. I've tried but just didn't work. Thanks again.

RE: GAS F1 INBOARD TUNNEL HULLS
 

Not sure where that is m8 if its on utube just click the utube tab and copy and paste the url from utube and it will apear in your post.
Mart

RE: GAS F1 INBOARD TUNNEL HULLS
 

Thanks m8.
Uploaded the vid and here is the URL
http://www.youtube.com/watch?v=ILefGYEZNRw

La-Tiff

RE: GAS F1 INBOARD TUNNEL HULLS
 

If there's no audio on the last link, try this one.
http://www.youtube.com/watch?v=xpnfl8JDaa0

Enjoy

La-tiff

RE: GAS F1 INBOARD TUNNEL HULLS
 

Here you go use utube tab when replying then copy and paste inbetween the brackets and it appears in the post.
Mart


[youtube]http://www.youtube.com/watch?v=ILefGYEZNRw[/youtube]

RE: GAS F1 INBOARD TUNNEL HULLS
 

Thanks again m8. I'm losing my touch on all this since changing to Apple. lol

RE: GAS F1 INBOARD TUNNEL HULLS
 

Some photo shoot pics of La-tiffs F1
http://i577.photobucket.com/albums/s...13520162_n.jpg<div>http://i577.photobucket.com/albums/s...53897545_n.jpg</div><div>http://i577.photobucket.com/albums/s...70352860_n.jpg</div><div>http://i577.photobucket.com/albums/s...40597359_n.jpg</div><div>http://i577.photobucket.com/albums/s...18686802_n.jpg</div>

RE: GAS F1 INBOARD TUNNEL HULLS
 

Yes, but I'm still playing around with settings and props, and there was really a lot of wind:
[youtube]http://www.youtube.com/watch?v=nCPxD-iY9Ls&amp;feature=youtu.be[/youtube]
http://www.youtube.com/watch?v=nCPxD...ature=youtu.be
From 16:30 till the end of the movie
<br type="_moz" />

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hi all tunnels are looking good. Will be starting on my 1/4 inboard tunnel soon. Just got the engine for it today. I know it is wrong type of engine for the forum but just wanted to know if anyone knows about the Russian made MAC 10? Monster nitro engine and think it would work awesome in my 1/4 inboard tunnel. Can't find much info on the engine on the net. Its brand new. What kind of hp? Max rpms? What % nitro?

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hi guys<div>thought id revive this thread and see whats happening in the IB tunnels builds
This is my new design IB F1

http://i577.photobucket.com/albums/s...psc0cbcc3f.jpg</div><div>
http://i577.photobucket.com/albums/s...ps01319895.jpg</div><div>
http://i577.photobucket.com/albums/s...ps429ed7b1.jpg</div><div>
http://i577.photobucket.com/albums/s...ps6ca14bd2.jpg

Still some work to do and final detail work but its getting there nowhttp://www.rcuniverse.com/forum/js/f.../thumbs_up.gif</div>

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hey Daz,

Yep, this thread been very quiet for a while now.

Its looking real good, very sleek and smooth lines. I remember that you were also doing a plug for another F1 too, I think ..... how's that one going ?

Cheers
Chris

RE: GAS F1 INBOARD TUNNEL HULLS
 

Well, I'll add to the revival of this thread too.

Here's my, still unpainted F1 inboard with dumpy Mercury cowl. Its running well with 29 stroker and custom hotpipe, still trying different props,
but think I'm pretty close to having finished and ready to strip for painting.
Last couple of pictures, are of the new repainted dumby cowl, as the cowl(in first pic's) was damaged when hull went skywards on the back straight.

Cheers
Chris

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hi Chris
Thanks bud,i was doing a plug/ mould but wasnt happy with it so decided to build a hull and will mould off this 1 instead ,the canopy will have to be done in 2 (split moulds) to keep the lines and shape also will be a new OB cowl and radio box to suit aswell ;)
working on both the X cat and this 1 so plenty to do at mo haha
You F1 looking good and sits nice on the water youll have to get some vids of it running ;)
Rgds Daz

RE: GAS F1 INBOARD TUNNEL HULLS
 

Thanks Daz.

Yer, I've been waiting for ages to get some video if it running, but hopefully will get some tomorrow, whether permitting. Really looking forward to getting this
bad boy painted up Mercury Racing livery.

Look forward to more updates on your as it proceeds along.

Cheers
Chris

RE: GAS F1 INBOARD TUNNEL HULLS
 

hey Chris try and get some vids bud
Look forward to seeing it painted up youll have to keep us posted and post some pics when done ;)
Ill post some updates once done and ready before im ready to start moulding ;)

RE: GAS F1 INBOARD TUNNEL HULLS
 

Another Jordo hull!!

RE: GAS F1 INBOARD TUNNEL HULLS
 

Looks Good Dion
you managed to run it yet ??

RE: GAS F1 INBOARD TUNNEL HULLS
 

Hey Daz,

Finally got some video of it running, so now just going through the editing process(learning how to). Will hopefully have it posted up later tonight or tomorrow night.

Good to see another Jordo hull Dion, and it looks like a Gen 1 hull. How's it running for you ?

Cheers
Chris