Make Board-Edge Clamps
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Spring Hill,
FL
Posts: 4,734
Likes: 0
Received 0 Likes
on
0 Posts
Make Board-Edge Clamps
I use large sanding boards that need to be clamped to my bench to be effective. In the past I've used C-clamps to hold them in place but they didn't work very well. I made these clamps using a piece of music wire, a couple blind nuts (T-nuts) and a thumbscrew.
There may be a proper name for this type clamp. If somebody knows, please tell me what it is.
[link=http://www.airfieldmodels.com/information_source/how_to_articles_for_model_builders/tools/make_board_edge_clamps/index.htm]Make Board-Edge Clamps[/link]
There may be a proper name for this type clamp. If somebody knows, please tell me what it is.
[link=http://www.airfieldmodels.com/information_source/how_to_articles_for_model_builders/tools/make_board_edge_clamps/index.htm]Make Board-Edge Clamps[/link]