This jet was flown with a Kingtech K-60. On it's third flight it had a hard landing and the nose was repaired. The wings, stabs and other parts were intact. The front of the fuselage had to be repainted. I could say that the fuselage paint is 7/10. The canopy has a small scratch that can be filled and painted, the canopy latch needs to be re-glued. All the optional gear doors are included.
This jet can be flown with a Jet Cat P-20, Wren, Kingtech K-45, K60 or even the new K-70.
The graphics on the wings (Futaba, Kingtech, Bavarian Demon) are vinyl stickers and can be completely removed.
JTM 90MM Red HPAT Viper Jet + Electric Retracts and Struts: $1,150 plus shipping https://www.jtm-cyprus.com/collectio...s/viper-jet-90
Tamjets custom made 32oz Kevlar fuel tank: $160 plus shipping http://www.tamjets.com/original/prod...roducts_id=824
Tamjets custom made pipe: $205 plus shipping http://www.tamjets.com/original/prod...roducts_id=812
Fromeco Wolverine Switch: $75 plus shipping http://www.dreamworksrc.com/catalog/...In-3-Deans-Out
Airpower Fill Valve: $16 plus shipping http://www.dreamworksrc.com/catalog/Airpower-Fill-Valve
Air Gauge: $19 plus shipping http://www.dreamworksrc.com/catalog/Air-Gauge-Single
8 Power HD/E-Flite Servos: About $200
Total: $1,825 + shipping + build time and supplies.