This engine was in a Skymaster F15. I sold the airframe as it was a bit hard for me to see in the color scheme I painted. Because of that I was never comtorable flying it. I have had several jets since then. I was thinking I would use it in another project. However it is a bit too much power for my next Skymaster 2 meter ViperJet.
Here is a link to the F-15 first flight video. https://www.dropbox.com/s/3jo3wayatvr6lmd/F-15_First_Flight.wmv?dl=0
There is only 1 hour, 14 min and 11 seconds original time on the engine with 8 ignitions as per the GSU.
* Full autostart & cool down sequences * Jet-tronic ECU (fuel control electronics) * GSU (Display and Programmer) is included * LED I/O board * Miniature fuel pump * Electronic starting gas valve * Electronic Fuel valve * Tubing connector set, filters, and cable set * Original 2 Cell LiPo battery pack (recomend replacing as it is getting puffy) * Starting gas tank * Turbine mounting clamp, RamTec compatible * Detailed instruction manual * FOD Screen. * Serial number: 2692
Specifications Thrust: 27 lbs @ 123,000 RPM Weight: 3.1 LB Diameter: 4.4 inches RPM Range: 33,000 - 123,000 RPM Exhaust gas temp: 580°C-690°C Fuel consumption: 12oz/min at full power Fuel: Jet A1, 1-K kerosene Lubrication: approximately 5% synthetic oil in the fuel Maintenance interval: 25 hours
Free FedEx Ground Shipping to the lower 48 US States.