Each ESC uses a twin PCB design separating the motor power supply & MCU. This design allows for optimum component layout on each PCB and provides the ideal configuration for heat dissipation and thermal efficiency. Both PCBs are enclosed in an aluminum heat sink casing to ensure maximum heat dispersion. The switching Fet's in this ESC are genuine top quality International Rectifier HEXFET's.
All Turnigy dlux ESCs can be programmed via a programing card or by transmitter.
Note: This in an OPTO ESC you will require an external BEC or Receiver battery.
Specs: Max Cont Current: 250A Max Burst Current: 275A BEC: N/A (OPTO) LiPo: 6~14S NiMH: 18~42cells Weight: 456grams Max RPM (2-pole): 200,000rpm Size: 135 x 77 x 50mm Motor Plug: Female 6mm bullet Connector Battery Plug: Nil
Features: Low Internal Resistance Low Operating Temperature Over Temperature Protection Spark Eliminator High Quality Hexfets (Mosfets)
Programming Options: Battery Type: Lixx / Nimh Forward/Reverse Soft Start LV Cut off Type (Ignore, Reduce Power, Stop Motor) LV Cut off setting Timing Switching (8,16kHz) Factory Restore
Default factory settings: Brake: off Battery: LiPo Auto Detect Low Voltage Cut: 3.2v (power down motor) Timing: Auto Frequency: 8KHz