!!!!! please help !!!!!!!!
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Madison,
WI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
!!!!! please help !!!!!!!!
Im about to get the mamba brushless package and theres a great deal down at the hobby store. Im wondering if I need a knew transmitter if I got the motor or can i use the stock one in the mini t?
#2
Member
Join Date: Nov 2003
Location: Ticonderoga,
CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
RE: !!!!! please help !!!!!!!!
I personally do not have a brushless motor however I do know that the motor selection (brushless,brushed) does not interfere or cause conflict with any reciever transmitter.
#3
Senior Member
Join Date: Jun 2005
Location: , HI
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
RE: !!!!! please help !!!!!!!!
I don't have a Mini-T either, but doesn't the stocker have that ESC and servo or Rx stuck together? I remember there was something they made that was in one unit. Wether it's the sero or RX, you'll be needing another of that since the ESC that comes in the Mamba package(if you are buying a package) is required to run your BL motor with. Good luck. If you're still not sure, ask they guys at your LHS before you buy the Mamba. That way you know how much you'll be spending. Or, you can always post another question.[8D]