westphill24

Hey Quad why the heck did you keep this to yourself? Great job by the way.

QUADS ONLY

I dont know why I kept It to myself. I just wanted to see how easy it would be before I said I was doing it. One thing led to another and I was this far along. whats funny is I only have about $120 bucks into this so far.

calvino

Wow, thats cool a nitro mini LST2..... looks alot like your LST2 only on a smaller scale.... . I remember seing a photo a while back of a nitro mini t, looked like someone "shoved" everything inside..... . A Picco P Zero should make it go prety fast, saw a video of it in a N18T (video by RC Driver), pulled like 35 MPH top end! So how fun is a mini nitro compared to your 1/8....

QUADS ONLY

no comparison, I beat the heck out of that 1/8 lst2. launching it off of everything. ramps and dirt hits. and its really fast. the mini is fun in the front yard and such. but just not the same. My brother and I are thinking of building a track for it on the side of my house. He probably wants me to build him one. I know brushless is super fast and all but I just like nitros and have a lot of fun. the smell and noise just attracts people and its almost always positive.

QUADS ONLY

more

makakoa808

Nice Job Man....
This says a lot about the mlst2 diffs. If they can handle nitro I wonder if it can handle a mamba max..? You got a vid..?
About how fast do you think your nitro goes.?

QUADS ONLY

Right now about as fast as stock, but I'm in the works Of changing that. Ive ordered up some xray nt18t parts . They have alot of gear choices which should get the speed up. It is probably no way of being close to brushless though. As Ive stated ; fast or slow I like nitro!
My buddy got a video camera and well try to get some vids up. but if my parts come soon Itll be a little later.

QUADS ONLY

got some video, not the greatest.



http://www.youtube.com/watch?v=TKUQtfCcfUw

ordered a picco motor and xray pipe and some gear options and I think it will be alot faster!

Mr. Mugen

Nice! Looks good man! It looks pretty quick for what it is. Not bad at all IMO. Hope it goes well for a while.

Kevin

QUADS ONLY

thanks Mr. Mugen, It is pretty quick. the video doesnt do it justice. When I get the new stuff I'll post up more.

nitro _ burner

You definitely need a higher gearing! What is the bottom end like ATM?

calvino

Great job there, now you have me all fired up to nitro convert my RC18T

QUADS ONLY

does anyone know of some bullet proof gears for the diffs? I installed a picco .08 motor and some better gearing, broke it in, tuned it, and pulled acouple of wheelies and ripped the gears out. dang it! just want to know what you brushless guys are doing? I definetly will get video as soon as its fixed.

Stampedekid

Awesome! I have been thinking of one but using the Picco P-Zero engine instead. My Nitro Stampede is for bashing around, BL Slash is for speed, but I think that I want another Nitro and I've been wanting to convert my MLST2 for a long time. How much would it cost(chaos reciever and whatnot) to mount it all up along with dual HS65MG's for steering($70)?

QUADS ONLY

yea, thats about right. Thats what I have. the picco p-zero. man alot of power! I'llthrow up some pics but the diffs are busted so no video yet.

QUADS ONLY

this is what it has now.




changed the pipe, spur gear, and put the raminator taller tires on it. man Does it move out now!

QUADS ONLY

no one?

So Cal

Well i didnt have anything better to do so i searched thetoyz.com for gears, and this is what they have.
Metal locked centerdiff
http://www.thetoyz.com/cart/thetoyz_...ame=MINI%20LST
A derlin ring gear
http://www.thetoyz.com/cart/thetoyz_...ame=MINI%20LST
Steel bevel pinion gears.
http://www.thetoyz.com/cart/thetoyz_...ame=MINI%20LST
And thats it for the toyz.
I dont know of any other site but atomic mods that would have better diff gears.
BTW that thing is bad anus. I love nitros.

revo_sbs

My Feedback: (23)

Sweet!!! That looks like a well converted mini lst. From the video it looks like it is waaay better than stock. Not only does it seem to perform it looks good as well. Now all you need is video of it with the picco.

SnailPowered

I just bought the brushless conversion for mine and I haven't gotten it in yet but I saw these diff gears and I am not sure if they will help solve your problem but I figured I would try my best to help!

[link=http://cgi.ebay.com/2Pcs-F-R-Ball-Differential-Shaft-Fits-Losi-Mini-LST_W0QQitemZ200290989337QQihZ010QQcategoryZ19167Q QcmdZViewItemQQ_trksidZp1742.m153.l1262]front and rear[/link]

[link=http://cgi.ebay.com/3-Differential-Gear-Box-3-Ball-Shafts-Fit-Losi-Mini-LST_W0QQitemZ110347213103QQihZ001QQcategoryZ19167Q QcmdZViewItemQQ_trksidZp1742.m153.l1262]Trans/diff housings and the gears[/link]

Like I say, I don't know if these will help but if someone else has some input I would appreciate it because I am sure mine will get smoked soon enough!

QUADS ONLY

thanks guys, I'mm sure that willhelp out. I'm leaning towards those aluminum ball diffs.

Check this out! whats wrong in this picture. two of these things are not like the others. "sesame street" LOL

IT was the center diff.

SnailPowered

HOLY GEEZE man! That is pretty awesome! I wonder if my brushless will do that. I don't think so, I got a 5400KV and I plan on gearing it for a little more top speed, so the torque won't be as bad...I think, LOL. Well if you get those ball diffs tell me how they work please. I would like to get them too once I smoke my stockers LOL. (The quote is from Conjunction Junction LOL)

QUADS ONLY

I figured out that the slipper was locked down. I thought that if I tightened up pretty good it would be fine. I was wrong! I'm going to get the metal slipper too. and make sure it slips a little. lol

QUADS ONLY

I'll let you know.

SnailPowered

Great work on the nitro BTW!! I didn't even say how awesome I think it is! I am keeping mine electric because I travel a lot and I can take it on a plane easier if it's not gas. Plus I want to take it to Iraq when I get deployed LOL.