need help with 1/16 revo setup
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: bloomingdale, GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
need help with 1/16 revo setup
i want to run my 2 2s lipos in series all the time and i want to be able to bash and race around at around 60-65mph. what do i need to buy to protect my motor and esc and batteries from burning up and what gears do i need to get and what material should they be made out of. i want this to be a fun setup i can enjoy all around. if its too dangerous to run the lipos in series what gearing do i need to run 60mph with the lipos in parrellel and still be able to bash? everything right now is stock and the batteries are 2 x ZIPPY Flightmax 2200mAh 2S1P 20C and i have a 19t pinion and a 31t pinion, just not installed trying to find spurs to match the pinions.
#2
Junior Member
Thread Starter
Join Date: Dec 2009
Location: bloomingdale, GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: need help with 1/16 revo setup
i ordered a 50t steel spur gear, and a heat sink. all i need now is 2 lvc's for the lipos right to keep it safe running in series?