problem :-/
 

i noticed when i was driving and i hit my break, the front right tire did not stop, it just slowed down realllllly slow (almost like the "break" wasnt working), so i was going to take off the tire to try to see whats wrong, and now i cant get the tire off lol, i took tires off before ut this one, the dogbone is spinning when i turn the nut, what should i do?

RE: problem :-/
 

Sound's like you rounded the hex, or didn't get it back onto the drivepin. Grab the dogbone with needle nose plier's and pull the nut to investigate.

RE: problem :-/
 

my needle nose pliers cant even grip the dog bones, it just scratches them, and i dont want to break them :(

RE: problem :-/
 

Hold the opposite tire and the drive while loosening nut.

RE: problem :-/
 

same thing, the dog bone is still just turning with my pliers

RE: problem :-/
 

Or the spring cam out. If the spring didn't come out, the dogbone broke, or the wheel got rounded off. I bet it was the spring or wheel.

RE: problem :-/
 

Can something be wedged into the outdrive? Something must be stripped/slipping inside drive if the dogbone is still turning. Anyways maybe a few more hands and hold tire/wheel at a bind, hold dogbone with serated pliers and then another hand on the nut?

RE: problem :-/
 

THis is why I like cvds, much easier to take the wheel off.

RE: problem :-/
 

damn, atleast i got it off but there is no little metal pin, its like really small [>:]

RE: problem :-/
 

You need the little pin. Unless you really crank it on there, you need the pin.

RE: problem :-/
 

ya, my mom is going to the hobby shop tommorow after work to pick me up some, hopefully they got them ^^

RE: problem :-/
 

I forgot about the spring, I love cvd's!