Charging a 7.2v 1100 NImh Battery?
I have a 7.2 1100 Nimh battery that i would like to charge. I have the Duretrax intellapeak pulse charger. I was wondering what amp setting i should charge my batteries on peak charge? and any other tips you would recomend
|
RE: Charging a 7.2v 1100 NImh Battery?
As a general rule the slower the better. If you have the time then charge it at around .3 amps or so. If your in a rush then charge it at 1.1 amps. Try to avoid going above this.
|
RE: Charging a 7.2v 1100 NImh Battery?
Yes the rule is for every thousand MA it is 1amp. So your best setting is 1.1 amp.
|
RE: Charging a 7.2v 1100 NImh Battery?
Well, a rate of 1.1 amps isn't the best charge rate. It is the highest rate at which you should ever charge an 1100mAh (A.K.A. 1.1Ah) NiMH battery. As GRANT ED said, slower is better if you have the time.
|
RE: Charging a 7.2v 1100 NImh Battery?
I would charge it at 1 amp or less.
|
RE: Charging a 7.2v 1100 NImh Battery?
im new to this, how long would that take?
|
RE: Charging a 7.2v 1100 NImh Battery?
A 1100 Nimh battery charging at one amp would fully charge in about one hour.
|
RE: Charging a 7.2v 1100 NImh Battery?
What peak voltage drop should be used on these 2/3 cells? 3-5 mV per cell (same as sub c's)?
|
All times are GMT -8. The time now is 11:54 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.