nauset,
it didn't have the servos in back but it had a glow engine in front so i'm hoping the g23 and radio gear in front will balance the servos in back just right. i'm also hoping the g23 will pull it around well enough.
the rear turtledeck is 1/64 plywood with a few stringers underneath and the front is 1/16 balsa, also over 3 stringers with two bulkheads between the front and back.
i'm really trying to keep from overbuilding it and i'm even willing to underbuild it and have it come apart a little just to see what i can get away with. it's all window dressing on top so we'll see how it goes.
regards,
bart