RCU Forums - View Single Post - HK-450GT CCPM Alloy T-Rex compatible
View Single Post
Old 10-14-2010 | 01:46 AM
  #23  
pgroom_68
Senior Member
 
Joined: Mar 2008
Posts: 3,863
Likes: 0
Received 0 Likes on 0 Posts
From: HornsbyNEW SOUTH WALES, AUSTRALIA
Default RE: HK-450GT CCPM Alloy T-Rex compatible

ORIGINAL: rikybob
Hiya Peter,
I found that I was so excited I would not order one thing and order two of the other[:@] For my project I used the power the sensitive Spektrum AR6100E that is prone to brown outs. Along with metal geared servos that pull an amp apiece. I am pulling 6 amps and did actually experience brown outs. My solution is [link=http://www.castlecreations.com/products/ccbec.html]this[/link]. No matter how hard I torture my ESC I have power to my critical systems. A very light 20USD insurance policy.
As we speak I am takin' a little vacation and hope to fly. Until then enjoy the below:
Best to all!
Hey again Brian,

Thanks for your solution mate - I may still hold onto the incorrect item when it arrives and add one of [link=http://www.castlecreations.com/products/ccbec.html]THOSE[/link] $25 CC-BECs to the system then

BTW, I already have similar Tx/Rx to Simon - the [link=http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042]HobbyKing T6A[/link] - and (hopefully) no brownouts........

Peter[sm=shades_smile.gif]
P.S. The AU$ is approaching parity with the US$ as we speak.........[sm=49_49.gif]
Good for us Aussies to buy things from the US![sm=thumbs_up.gif]
P.P.S. I haven't had a real holiday for a year[sm=72_72.gif]