RCU Forums - View Single Post - converting a .21 nitro to spark ignition
Old 10-21-2010 | 02:11 PM
  #24  
optech
My Feedback: (9)
 
Joined: Jan 2002
Posts: 552
Likes: 0
Received 0 Likes on 0 Posts
From: Copperas Cove, Tx.
Default RE: converting a .21 nitro to spark ignition


ORIGINAL: captinjohn

The carb may be tricky. But a regular glow carb may work if it will draw fuel & if the needle is not to touchy to adjust. Look up a small RC car that was made in Italy. It was about the same cc & was gas with CD ignition. Capt,n

http://www.classic.rc-junkies.net/?page_id=637
They're sold here in the states through MECOA http://www.mecoa.com/compagnucci/index.htm I've always wanted to inspect one of these and see if anything is transferable to other planes or cars but WOW..... they are expensive just be poking around on.