RCU Forums - View Single Post - World models 80 inch p51 engine advice
View Single Post
Old 12-02-2010, 10:56 PM
  #32  
benjret
Member
 
Join Date: Sep 2009
Location: Jakarta, INDONESIA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default RE: World models 80 inch p51 engine advice

Hi rc34074..
On that Video im holding the camera. my friend Joseph is the pilot
but i really enjoy flying my Plane with this engine. i don't like 18x10 because is more slower than 17x10.
i planning to use 17x12 but very hard to find here. i fly this plane first
came out of the box 2 months a go. but still using an OS FS 200 non pump. but this engine dont work for my Miss America.
i don't need any modiefied with my plane. still using Pul-Pul System on Elevator&Rudder. as you known i using HXT12K 15kg from Hobby King for elevator, rudder, aileron and retract.! for Flaps and Throtlle im using Futaba S3003
for engine i use DLE 30 Rear Carburator. installed inverted. move 2 lipo to front behind of fuel tank. add More ballast on nose below engine 120g and go to fly.!

Now i just need 2liters of Gas for Flying all day long!

Many thanks..

JESSY