RCU Forums - View Single Post - Comp ARF BAE Hawk build thread
View Single Post
Old 12-11-2010 | 10:19 AM
  #580  
Dave Wilshere
 
Joined: Jun 2002
Posts: 13,266
Received 793 Likes on 576 Posts
From: Watford, UNITED KINGDOM
Default RE: Comp ARF BAE Hawk build thread

Mike

UP 3 would be a great option. I test flew a Graupner Hawk (same units with scale leg option which are heavy!) today with a UP 3 and the gear worked fine.

I used 3mm festo tube straight onto the nipples...I stretch the tube a little with a phillips screw driver pushed in a few mm. But most have used a short length of 4mm tube then stepped down.

I feel 3mm tube is best through most of the system.

Dave