RE: Larger Revolver
I think I had similar wrinkles, but they were removed with an iron that I wrapped in a cotton cloth, the remnant of an old shirt. The canopy looks terrible - I would be calling Great Planes if it could not be easily corrected. While my ailerons were not perfect, they are functional. However, the elevators were not set right - one was hinged above the center of the horizontal stab and the other was below. I ended up rehinging them. You may find it interesting that I am currently building a 50 cc Yak from one of the premier brands, which has alignment issues with the pin hinges. Quality control seems to be a big issue for more than one Chinese manufacturer. Pretty sad. I would normally consider this quality a second! Surely not first quality - more like junk! On the other side, Tower has stood behind any necessary corrections in the past. Although some times the replacement parts have the same issues as the original.