I'm thinking about buying a 250 clone, my first ever 250 size, minus the blade cp's years ago.( This will be my only heli, but not my first buy a long shot. )
Here is my question it's a Duse.
I have a spare exceed rc alpha 400 920kv motor. And some other stuff,a setof4 exi 9g digital mg servos, 1000mah 3s 11.v lipo and a 30a esc. I'm hoping this all will work in this little heli. My main concern is the heli comes with a 15t pinon.My motor shaft is 1/8 in (3.175mm)
And the heli recommends a Scorpion HK-2206-3900 and it's shaft is
2.50 mm (0.098 in)
So it seems my motor shaft is bigger, wander if I could bore the pinion out to fit my motor shaft?
Here is the heli.
http://www.scaleflying.com/Full-Hous...Kit_p_827.html
And heres my motor,
http://www.hobbypartz.com/alpha-4009...ess-motor.html
Thanks