LOL!  I had to reajust all of the Pushrod lengths and bell cranks after taking the push rods out of the plastic guides through the servo compartment due to the bend at the servo end. The only way I could figure to get them out easily was to remove the clevis's. I already had them adjusted and had to completely redo everything after I removed the pushrods. I had already removed the elevator and rudder along with all of the hardware, to cover them. Anyway, I am about 25% along with the Monokote covering since. Hope to be finished with the Kit by end of next week. I am working about 6 to 8 hours a day on it.

Any way this is a Great Planes Kit and seems to be reasonably standard. I have already bought another Great Planes Kit and it has the same pushrod assembly.

Again, THANKS for your interest in my problems.

Jim