RE: Skymaster 1:6 A10 Build
While I wait for my preferred servo horns to arrive from Fighteraces I made a start on the stab. Similar to the ailerons they required a little relief but not as much thankfully. Again Ive used a little flight metal on the white gap seal then applied rivets and panels. Skymaster suggest internal linkages on the elevators but looking at the geometry I'd much prefer external links as the ATV's would be around 25% which isn't very efficient. The molded detail is suberb so I've attached a close up of one half of the stab, I'm looking forward to bringing this model to life with some weathering.