Last night I disassembled the buggy and took all the parts that I will be using for this project. I then went thru and cleaned all the parts. This project is ofcourse going to end getting dirty but it has to be clean for the finished pictures.. plus, I don't like working with dirty parts.
The Slayer a-arms will probably be replaced with Slayer Pro a-arms and the rear hubs will probably be replaced with Rpm hubs.
I layed out partial front and rear ends to get a idea of how long its going to be .. and how everything is going to be layed out. Ofcourse the center diff and motor and all that are going to be raised up from the position that they are at in the pictures since its a monster truck.
Here is my list of stuff to get...
1/4" lexan or 1/8" 6061-T6 aluminum for chassis
Traxxas Updated slayer a-arms
Losi High Roller Body
Dust boots
2.8 Badland or Trencher Tires
Rpm revo hub carriers
Rpm Front/Rear bumpers
Rpm Front/Rear bumper mounts
Traxxas front/rear body mounts
Ace 5000mah 3s lipo
Reciever
I have the esc and servo. And the motor is shipping out monday.. I will show you guys what motor I'm going to be using once it comes.