RCU Forums - View Single Post - TT .46 Pro problem.
View Single Post
Old 03-11-2011 | 03:25 PM
  #184  
1QwkSport2.5r's Avatar
1QwkSport2.5r
 
Joined: Oct 2006
Posts: 10,531
Received 105 Likes on 93 Posts
From: Cottage Grove, MN
Default RE: TT .46 Pro problem.

Alright.. I didnt mess around too long since the wind kicked up some.. Air temp outside 41°F, wind at 15mph. Not ideal, but what the heck.. Starting off I went noticeably rich, then leaned past peak and richened back to close to full RPM. In one of the videos, I went way rich twice by accident. My tach jumps around a bit - I'm gonna find a more accurate one this summer sometime.
9x7 APC, 5% nitro / 20% oil (75% castor/25% synthetic), MC59 plug
http://s153.photobucket.com/albums/s...t=MVI_0010.mp4
10x5 APC, same fuel/plug
http://s153.photobucket.com/albums/s...t=MVI_0011.mp4
10x6 APC again, same fuel/plug
http://s153.photobucket.com/albums/s...t=MVI_0014.mp4
Transition is pretty good - Idle mix is a tad rich still - didnt touch it in any of these 3 runs because I didnt feel it necessary.