I think the C word is Capiche. There are a few users here that are very loyal to that airplane. Im not even sure if they know other planes exist I have never flown a capiche but I have flown the Laser3d and you made a good choice on the airplane. I would have went with a YS 63 or Saito .72 for power but you will still enjoy the plane with the .53 2 stroker. What servos do you plan on running in it? I would run something with around 70 oz. of torque. I am running Hitech 605's all the way around, with the exception of the rudder there I am running a Hitech 645MG. With this set up I am getting around 65 degrees up deflection on my elevator and 50 degrees down (any lower and it begins to rub on other things).