RCU Forums - View Single Post - Ignition Battery Voltage Question
View Single Post
Old 04-26-2011 | 04:04 PM
  #50  
apalsson's Avatar
apalsson
My Feedback: (1)
 
Joined: Jun 2003
Posts: 2,306
Likes: 0
Received 1 Like on 1 Post
From: Coffs Harbour NSW, AUSTRALIA
Default RE: Ignition Battery Voltage Question


ORIGINAL: Truckracer

Jezmo,

Well stated!

Like you I use A123 batteries for flight packs in my newer planes but my NiCd and NIMH batteries are serving extremely well for ignition. I still have quite a fleet of smaller and seldom flown planes that use nickel based batteries and will continue to do so until they die from old age. Yes, these older batteries will probably be replaced with A123s when the time comes but I'm certainly not going to throw out perfectly good batteries just because newer technology has come along. Unless something changes, my transmitters will continue to use Eneloop batteries. In over 40 years of flying RC, I have never had an in flight battery failure.
My setup too exactly!
A123 on flight packs and Eneloop on ignitions for 50cc and up
Smaller planes, simply a 5-cell Eneloop on RX and a 4-cell Eneloop on ignition