RCU Forums - View Single Post - Phoenix 7 ARF Assembly Thread
View Single Post
Old 05-13-2011 | 06:46 AM
  #26  
gade600sdi
Senior Member
 
Joined: Mar 2009
Posts: 298
Likes: 0
Received 1 Like on 1 Post
From: Harrisburg, PA
Default RE: Phoenix 7 ARF Assembly Thread

Tony, do you have any pictures of the tank mod? Would a 12 or 14 oz tank get it even lower as it would be smaller? I could live with an 8 or 10 minute flight as right now my flights are 2 minutes and pucker up on the dead stick landing. About 8 flights on this now two different days out and 8 dead sticks. I have been real frustrated with this model, I get it running good on the ground and fly for 2 minutes and dead stick constantly. All my other Evo and Os planes I can tune so I almost never have a dead stick. I am using the remote needle valve on the Evo 60 also, would you recommend bypassing that and moving it up to the carb? I pulled the engine out and ran on a test stand, ran perfect, but wont run in the plane.