RCU Forums - View Single Post - Black Magic VF3 Build Thread
View Single Post
Old 05-21-2011 | 06:05 PM
  #1539  
edwarda10pilot
My Feedback: (3)
 
Joined: Mar 2002
Posts: 559
Likes: 0
Received 3 Likes on 3 Posts
From: Seguin, TX
Default RE: Black Magic VF3 Build Thread

Larry:

thanks for the reply. I have pretty good building skills and was just trying to crack a bit of a joke. I really don't like to do film covering so I tend to paint most of my planes, including pattern planes. In reality, I have about 20+ pattern planes under my belt and have been building for about 50 years (started with free flights ,then to control line and Rc in 1973). Somewhere along the line I began to build crash proof (probably started when I did warbirds and jets) and I am getting back to building light. i agree about the paint. I have had conversations with Bryan Hebert and others about my painting practices and they have offered some pointers. I think I will be OK on weight. I had better be since this is intended to be my Nats plane.

Thanks again for the advice and encouragement,
Ed