I've been flying the Reactor for about 3 years with a Saito .82 swinging an APC 14X4W prop. This plane 3D's very well and the pull out is not balistic with the .82. I bought some after market CF landing gear since at the time the stock gear was swept back to much causing the plane to nose over. FREE updated gear was being shipped to all customer that ask for it. Never had an issue with the landing gear blocks. The Reactor has very thin wings like a Pattern plane and it does very well at IMAC and Pattern flying. Landings are a breeze with this plane as you can fly it to the ground or cut the throttle and float it in. I had the smaller U-CAN-DO and it had very thick wings and the wind seem to bother it more than the Reactor. The Reactor has issues with the covering peeling off. Far the two that I had the Reactor is a much better flying plane. I'm looking at recovering my Reactor and going electric this time around.