Hey Guys... Yeah, This thing is Pretty much a piece of **** until you make it into something nice... Ive Been Performing mod after mod after mod... From tail to engine.... Its turning out pretty nice though. My Stabilizer Has Brass Reenforced Carbon fiber 1/8 thick tube running the entire length from tip to tip. Also using 4/40 screws to hold them tight against the fuse while the epoxy dries. For Power I am using a BVM 91 Fan Engine.... Im having to go through everything including tearing the wings apart to reenforce them. Then Glass the wings and Paint them. It will be very nice when finished. Yes, Some will Believe that this is way to much work on a 300 dollar Air plane and Yes Thunder tiger should be ashamed of Selling such a Piece of crap to the public not to mention the safety aspect,With that being said... This is a beautiful Air craft and would be a shame not to put the Extra time in it and then Really Admire the fact that you did make it safe to fly and enjoy the plane with out a shadow of a doubt that there would be some kind of Catastrophic Failure in mid air. This is where it pays off to really take ur time and do it RIGHT! Here is some pictures of my Progress... Hope you enjoy!