RCU Forums - View Single Post - Pilatus PC9 1/3 scale
View Single Post
Old 07-05-2011, 11:27 PM
  #129  
BigP38Lightning
 
BigP38Lightning's Avatar
 
Join Date: Aug 2009
Location: Paris, FRANCE
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Pilatus PC9 1/3 scale


Christian's fuselage progressing well.

Interior view, the airbrake is in place, and there are lot of space.

Under the pilot the two 1.5-liter tanks, this is too short for the engine that will be 5 liters total when flying.

Christian with his work, the front cockpit.

Setting up the front cockpit.


Back view.

Filling the cockpit.

With the front dashboard in place.

Side view with the pilot and his seat.

The pilot on his seat there is plenty of room.

Christian presnting the instructor's seat.

The back seat in place hiding the rear access door.

The pilot in place, the cockpit is filled like this.

Other side view.


The airbrake going outside.

Back view. Too bad the back plate was mounted sideways ...

Front view of the airbrake deployed.


Once mounted the airplane looks well. Christian spent the finish on the back.

Side view, left airbrake.

Same with the left exterior flaps.

View from the back seat.

view of the access hatch that give access to the rear fuselage screews.

Back dashboard.