Inbound - About 5 years ago I was where you are now. I wanted a jet model of a plane that I could not buy as a kit or ARF. I had no experience with making molds. After hours & hours of research and study on mold making and consulting with two friends I started.

I used some ideas I came up with that I feel worked very well for me. You can see the basics on my web site at: http://www.sidgates.us

Look under "Models" then "F-94C" If you have any questions call me 303-757-7019

WARNING - It takes a lot of dedication to finish a project like this. I am finally close to my first test flight.