Hi folks, i has tested the engine without priming with ether or dieselfuel with ether when the engine ran at etherless fuel. I tried with electric drill to start up the engine. But the drill is not fast, 1400 rpm only. I learned out the gasoline mixed in kerosene will reduce viscosity who can give better atomizing in the carburator/engine.

In the first movie the engine ran at fuel who has 1 part gasoline, 1 part kerosene, 1 part 15W-50 motoroil.
In the second movie the engine ran at fuel who has 40% kerosene, 30% gasoline, 30% 15W-50

And the next movie the engine ran at 3 parts kerosene, 1 parts gasoline ,2 parts motoroil 15W-50 , and the engine was handstarted with priming the engine with ready mixet dieselfuel with ether.

Now, do you have comments about starting the engine without priming

The etherless fuel was mixed after the fuel recipe from old books from USSR

[youtube]http://www.youtube.com/watch?v=uxfZ3OT3onU[/youtube]

[youtube]http://www.youtube.com/watch?v=G_ZZAqgx2hA[/youtube]

[youtube]http://www.youtube.com/watch?v=UYOdh5b8cNg[/youtube]

Edit: Corrected lack of text..