The following settings should provide clean, flame free starts with the flightworks 200 pump.

Start Parameters with the Flightworks pump should be:

Pump Start Point: Auto +4
Pump Start Ramp: 013
Glow: 32 (good start point)
Gas: 50%(good start point)
Starter Power @ Ignition: 065
Ignition Max RPM: 4K
Ignition Min RPM: 2K
Preheat: 2.0s
RPM Gas off: 15K
Starter Power @ Preheat: 070
RPM 100% Starter Power: 25K
RPM Starter Off: 28K
RPM Reconnect: 25K
Start Mode: Auto-Gas

These settings should solve your ramp issues.
Todd