RE: CARF-Models P-47 Thunderbolt
Just a thought for consideration:
Since the force from the torque rod to the elevators is transferred basically via the bolt heads thru the "pockets", it may not be a bad idea to apply a thin coat of Evercote Polyester Putty to the walls of the "pockets", and immediately install the bolts with some vaseline on the head [X(].
This will ensure full contact between the heads and the pockets.
In addition, for those like me who have to take the elevators off to transport the plane to the field, this will guarantee a consistent alignment of the elevators every time.
Jack