Here is a question.

can it take an input from one channel, but operate just One servo when the stick is moved in one direction, and then a separate servo when the stick is moved in the opposite direction? And be able to turn both of these servo's off with the input of a separate channel?

For example.
when switch A is in position 1:
A roll to the left is input by the transmitter. servo #1 moves to extend a spoiler, but the servo #2 does not move.
A roll to the right is input by the transmitter. servo #2 moves to extend a spoiler, but servo #1 does not move.

Then with switch A in position 2: Neither servo #1 or #2 move.


Can it do that?