RCU Forums - View Single Post - Small 3d Capable plane for a 120 four stroke
Old 10-10-2011 | 08:38 PM
  #9  
nitro wing
Senior Member
My Feedback: (1)
 
Joined: Sep 2003
Posts: 3,775
Likes: 0
Received 0 Likes on 0 Posts
From: surrey, BC, CANADA
Default RE: Small 3d Capable plane for a 120 four stroke

ORIGINAL: zacharyR

DO NOT BY H9 FUNTANA !!


also ohio models makes great airframe's but they are mostly none fused airplanes in that size

3dhs and EF do not make NITRO MODELS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! just FYI

and most of the pepole that fly those name brand's already have turned away from Nitro... [:-]

Dude ya gotta chill out a bit
The funtana was one of the biggest sucess planes out there, 98% have had good experinces with them...

EF makes plenty of planes that can fly on nitro motors, just because its say suitable for a small gasser, does not make it not ideal for nitro. A YS 120-140 would fly it very well or an OS 160 would rip in that thing.
Also the DLE 20 is not more power and does not swing a much larger prop.

Maybe read the descriptions?
http://www.3dhobbyshop.com/68-VeloxYellow_p_15302.html
http://www.e-fliterc.com/Products/De...ProdID=EFL2600