RE: Pheonix Extra 330S 60-90 Size
Dave, You are quite right. This is the 1st aerobatic model that I have built that I have not done the mod on the elevator. For some reason I decided to go exactly by the plans with no mods. I kind of regret that now. I think over the winter I will pull the stock servo's and buy some metal gear servo's for the elevator's. I am building a Sig Fazer currently and I can use the stock servo's on the Fazer. Anyway when I first built this model it was pretty twitchy and I consider myself an intermediate flyer. So I dumbed it down a little bit, 60% expo and 40% controol throws on low rates. Now that I am getting used to the plane i am about ready to decrease the expo and increase the control thows. Anyway, my plane comes in right at 7 lbs with the GMS .76, and I am not into 3D so I get along just fine with the power unit.