RCU Forums - View Single Post - Using Mic servo for St. servo

11-01-2011 | 11:37 AM

#6

jaka

Joined: Dec 2001

Posts: 7,816

Likes: 0

Received 10 Likes on 10 Posts

From: Upplands Vasby, SWEDEN

RE: Using Mic servo for St. servo

Hi!
Standard servos weigh around 40-50g. Could be replaced by mini servos without problems (i.e Hs 225) that weigh 22g.
Sawing 50g on a small .40 plane is much!
But then I'm a pylon racer

Reply Like