RE: Has anyone tried the new PTE36R ?
Ok i got my rcxl ignition installed tonite and it runs great with no glitches.I still need to check the timing in the morning but it starts fine and idles @1300 for ever .It will idle down to 1100 but stumbles a bit.I have a 20x10 zinger and i got 6300 rpm .I think its a tad rich and i was trying to compensate for the bad ignition with enriching the needles.I pulled the old cap off and found a brown resistor in it just rattling around so im sure the ignition is fine.I bought an extra cap kit and will install it later.Keep in mind that im at 4800 feet so i think thats pretty good rpm on a 20x10