ORIGINAL: Mike Gretz
freedogg ... The manual calls for a high rate setting of 1-3/8'' up and 1-3/8'' down for the ailerons. You probably won't be happy with ''a little under an inch''. Please call Becky at 800-247-5008. We'll see if we can get you another wing.
emailbanter ... I like the big Sundancer too. Still have mine, with a 3.4 (56cc) gas engine. Unfortunately it was a slow seller. Maybe because it wasn't scale. We've talked about making another short run of them, but it is a little ways down the priority list at this time.
zippi ... I certainly appreciate all the Evansville Club has done to keep the Rascal 110 alive during the 2-1/2 years we were out of them. I'm well aware of the Rascal 110 Fly-Ins your club hosted. Was it 2 or 3 years in a row? If ya ever do it again, I'll be there!
We had the Rascal 110 fly-in two years in a row. There is a possible chance that we might have one this year but it all depends on parts availability. There are a lot of guys I know that are needing struts and windshields. Do you have parts available for order currently?
I also have one wing that can not get the full throw in the down position. I'm going to recheck it tonight. I also may have to give Becky a call.